To Fix A Leaky Faucet.

If you are looking for a simple way to fix a leaky faucet, then this is the guide for you. This article will show you how to fix a leaky faucet in your home. You will be able to do this repair yourself, saving you the cost of a plumber.

Step 1 - Shut Off the Water Supply

Before you begin any work on your faucet, make sure that you shut off the water supply to the faucet. This will prevent you from getting water all over your floor while you are working on the faucet.

Step 2 – Remove the Faucet Handle

The handle is the part of the faucet that you use to turn the water on and off. The handle is attached to the faucet with a set screw. To remove the handle, simply unscrew the set screw with a small screwdriver.

If you have a single handle faucet, remove the handle by unscrewing it from the stem of the faucet. If you have a two handle faucet, remove the handles by unscrewing them from the stems.

Step 3 – Remove the Faucet Stem

If you have a single handle faucet, you will need to remove the stem. The stem is the metal rod that connects the handle to the faucet body. If you have a two handle faucet, you will need to remove both stems.

Use a pair of pliers to grip the stem faucet that you use to turn the water on and off. The handle is held in place by a screw or set of screws.

To remove the handle, unscrew the screws holding it in place. Once you have removed the screws, and turn it counter clockwise. It should come out fairly easily.

Step 5 – Remove the Faucet

Once you have removed the handle, you can remove the faucet. The faucet is attached to the sink with a large nut. To remove the faucet, simply unscrew the nut with a wrench.

Step 6 – Remove the P-Trap

The p-trap is a curved pipe that connects to the sink drain. It runs under the sink and connects to the main drain line. The p-trap prevents water from flowing back into the sink.

To remove the p-trap, you will need to remove the nut that holds it in place. You can use a wrench or a pair of pliers to do this. Once you have removed the nut, pull the p-trap out of the drain. You can then clean it with a rag and some warm water.

If you have a sink that has a pop-up stopper, you will need to remove the stopper in order to get to the p-trap. To do this, use a pair of pliers to pull up on the stopper until it pops out of place.

Step 7 – Remove the Drain Strainer

The drain strainer is a small piece of metal that is located on the bottom of the drain. It is held in place by a small nut. To remove it, you will need to use a wrench or pair of pliers to loosen the nut. Once you have loosened it, you can pull the strainer out of the drain.

Step 8 – Remove the P-Trap

The P-trap is a U-shaped piece of metal that fits over the drain. It is held in place by a nut and washer. To remove it, you will need to use a wrench or pair of pliers to loosen.

Now that you have removed all of the other parts, you can remove the p-trap. To do this, simply unscrew the nut and washer that hold it in place.

Step 9 – Cleaning the Drain

Once you have removed all of the parts, you can now clean out your drain. First, use a long pipe cleaner to remove any hair or other debris that may be clogging the drain.

Step 10 – Replacing the P-Trap

After you have cleaned out your drain, you can now replace the p-trap. Simply place it over the drain and screw it back into place.

This is a good time to make sure that the p-trap is still in good shape and not cracked or broken. If it is, you will need to replace it.Turn off the water supply to the sink. You can do this by turning off the shutoff valve for that sink, or by turning off the main water supply to your home.

Remove the old faucet from the sink.If you have a two-handle faucet, remove the handle by unscrewing it. If you have a single-handle faucet, remove the screws that hold the faucet to the sink.

Remove any old caulk from the sink. Use a putty knife to scrape off any old caulk.

Clean the sink with soap and water. Remove any residue from the sink. Dry the sink with a towel.

Measure the distance between the holes in the sink. Measure the distance between the holes in the new faucet.

Use a ruler to measure the distance.

Place the new faucet in the sink. Line up the holes in the faucet with the holes in the sink.

Secure the faucet to the sink with tight screws.